Expert Answers about RV Interior Lights

• Looking for a Replacement Lens for an Interior Light on a 1998 Hitchhiker 5th Wheel Trailer
• We may have a replacement lens that will work for you, but we will need a little more information about the light.. Unfortunately we do not have any lights or lenses with a number similar to 30-75-xxx. It is possible that the light was changed or updated somewhere down the line and given a new part number. If you can send me a picture and approximate dimensions of your interior light and lens, I would be happy to see if we have something that would work. RV and trailer manufacturers do...
  view full answer...


• Hardware Recommended to Install Optronics LED RV Interior Light RVILL34
• If you replace existing trailer lights that use a single 921 bulb with the Optronics LED RV Interior Light # RVILL34 you will substantially increase the total light in the trailer and at the same time reduce your power consumption since LEDs are roughly 10-times more efficient than incandescent bulb lights. Your hardware choice depends on the surface material. If the trailer interior material is plywood, use wood screws. The mounting holes in the base measure 0.2-inches diameter. I checked...
  view full answer...


• Replacement Interior Lights For A 2023 Intech Terra
• When it comes to replacing your interior lights in your 2023 Intech Terra I would recommend The Gustafson 12V RV LED Puck Light # 277-000489. I recommend this light because it has an integrated push button that allows you to turn the light on or off. The light will provide you will a soft, accented light and has a 2 wire design white for ground and black for power. The 12V RV LED Puck Light # CE36FR would work for you to but it does not have the push button option. You can also add The...
  view full answer...


• Interior LED Puck Light With Click/Press On Options
• The Interior LED Puck Light # DG52509VP is 5" and designed for indoor use. These lights have a click feature that lets you turn them on and off.
  view full answer...


• Matching Interior Wall Light For The Gustafson 12V RV Ceiling Light With Shades
• Yes there actually is a matching wall light for the: -Gustafson 12V RV Ceiling Light you're looking at. Check out the: -Gustafson 12V RV Wall Light w Light Shade # 277-000254. This wall light features the same bell-shaped frosted glass, as well as the same satin nickel housing as # 277-000447.
  view full answer...


• Recommended Replacement for a Sunlink RV Interior Light Model RVSMD-BF-129512NL-8
• The closest replacement I was able to find for your Sunlink light Model # RVSMD-BF-129512NL-801L is the Gustafson 12V RV LED Ceiling Light - 10" Diameter # GUS54FR. This is an LED light replacement that measures 10" diameter x 3-1/2" tall, has mount hole spacing that is 4-1/4" center to center, and uses a simple two-wire design for easy installation.
  view full answer...


• Recommended Replacement LED Light for Jupiter 07-004WW/NW Dome Light
• I have a solution for you, but we do not offer that exact light that you've mentioned. However, from what I was able to find out, that light is a surface mounted LED light with a switch that is approximately 9" long. I recommend taking a look at the Gustafson RV Pancake Light - Double Dome - Clear Optic Lens - 18 LEDs # 277-000340, which is a bright LED pancake style light with a switch. This light is 11" long, so it's a bit longer than the light you're replacing, but that's just going...
  view full answer...


• Replacement LED Strip Light with Tail Light, Brake and Turn Signal Function for 2015 Cedar Creek 5W
• I may have a solution for you, but most of our larger ceiling lights have switches built in. However, you can use a puck light like the LED RV Interior Light # 328-K-1050Q9, which does not have a switch and mounts on the ceiling surface. These lights are 4-1/2" in diameter and come with 9 bright LED diodes to provide a small and easy to install light solution for your Cedar Creek 5th Wheel. Another option would be the Opti-Brite Low Profile LED RV Dome Light - 390 Lumens - Round - Clear...
  view full answer...


• Is Dimmer Switch or Softer LED Puck Light Available for 2019 Forest River Flagstaff RV
• I can definitely see why the Command Electronics LED RV Interior Light # 328-K-1051SQ9 would be a bit too bright inside your RV. While there isn't a specific dimmer switch made for this light, you should be able to purchase one from your local home improvement store. Just be sure that the switch is rated for LED lighting since LEDs pull less power. We also carry the Gustafson RV LED Puck Light # 277-000489 which has more of a warm color that will be a little easier on your eyes. This has...
  view full answer...


• LaSalle Bristol Interior RV LED Light Was Flickering But Now Doesnt Work
• It could be a number of reasons why your LaSalle Bristol RV LED Dome Light # 344410PCDS010008RT, which is no longer offered from the manufacturer, started flickering and now does not work. On average LED bulbs typically have a lifespan of 50,000 hours and there may be a chance that it is burnt out. Voltage drops also will cause flicker, so if you have multiple appliances running at once, it may cause your lights to flicker. Finally, I would check the wiring to the unit itself. You can...
  view full answer...


• Recommended Small Replacement Interior LED Puck Light for an RV
• The GloLight LED RV Dome Light with Chrome Trim Ring # UCL160CB measures 3" in diameter and is a complete light with the lens not being separate, so it's actually going to need to wired into your existing wiring. It sounds like you're looking for a lens instead of a bulb, and the smallest replacement lens we carry is the is 3" in diameter. Since the light you have is a bit small and relatively uncommon, you might find it easier to replace the entire light with the 12V RV Puck Light #...
  view full answer...


• Replacement Interior LED Lights for 2007 Roadmaster Monaco
• There won't be a way to retrofit old incandescent lights to work with LED lights, so you will need to replace your existing lights. I also am not able to cross reference any of the part numbers you mentioned, but the dimensions are helpful. Something like the Opti-Brite LED RV Dome Light - 880 Lumens - Flange Mount - Rectangle - Clear Lens # ILL10CCB you were looking at might be a good option to replace the larger light since they're similar sizes, but it does not have an exterior switch...
  view full answer...


• Replacement Interior LED Light For Truck Camper On A 2022 Ford F-350
• The Opti-Brite LED Dome Light for Refrigerated Trucks and Trailers # OPT38FR will work fine but it may be quite bright at 1,200 Lumens. Instead, I recommend the Opti-Brite LED RV Dome Light # ILL10CCB, which feature the same dimensions, but only put out 880 Lumens, which will be easier on the eyes.
  view full answer...


• Parts Needed To Provide Power To LED Courtesy Light for RVs # 328-002-04W
• The LED Courtesy Light for RVs # 328-002-04W only require a very small 12 volt power source since each light only uses 0.02 amps of power. If you have any 12 volt lighting or fans you will be able to tap into their power and add a Switch # 37213405 or # 37212225 allowing you to switch the lights on and off when needed. If you do not have a 12 volt power source near you will need a Power Converter # FV1101-09 to adapt from 110 volt power to 12 volt power. Then you will need the male end...
  view full answer...


• Recommended Replacement Interior LED Lights Measuring Over 15
• I did some searching and the closest I was able to find to what you're needing was the: -Optronics 12V LED RV Dome Light # RVILL50 which measures 15-3/4" long, 3-5/16" wide, and is 1-13/16" deep. & -Opti-Brite LED RV Dome Light - 880 Lumens - Flange Mount # ILL10CCB which measures 18" long, 5-3/4" tall, and is 1" thick. The Optronics # RVILL50 has a raw Lumens output of 870, an effective Lumen output of 720 Lumens and the LEDs have a lifetime warranty, while the Opti-Brite LED RV Dome...
  view full answer...


• How Can I Add Aux Power When Using My 4-Way Harness to Power My Trailer Lights?
• The best option for you is to add a 7-way connector to your 4-way harnesses you already have installed. This way, you will have access for an auxiliary source. While most factory 7-way harnesses do not have power when the vehicle is turned off, the kit we have provides you with a "hot all the time" power source. That is the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. In order to use this, you need a 7-way plug on the trailer's...
  view full answer...


• Interior LED Light & Solar Panel For Cargo Trailer
• For the interior LED light, you can use essentially any style that best suits your needs, such as the Opti-Brite LED Dome Light # ILL06COB. I have added a link below to our selection of interior LED lights as well. As for the solar panel, that really depends on your power needs, but if it's just for a battery controlling a light, something small will be fine, and I recommend the OptiMate Solar Charging System with Controller - 80 Watt Solar Panel # MA46JR. The # MA46JR is a single panel...
  view full answer...


• Parts Needed to Install Dome, Strobe and Reverse Lights on CarMate Trailer
• We can certainly help you find the lights you're looking for. For the interior light you can use the Patrick Industries # 277-000114 which are an LED dome light with a switch built in. These lights have 6 diodes that provide a bright LED light that will work well on the interior of your CarMate trailer. For the strobe light you can use the Custer 4-LED Strobe Light or Running Light - 3-Wire Pigtail # STRL4W which provides you with both flashing and solid lights that can be installed outside...
  view full answer...


• Parts Needed For Wiring 2 Light Switches at 2 Doors To Operate Lights Like a 3-Way Switch
• I recommend placing 2 of the Single Rocker Switch # 37212635 at both the front and rear door with the Double Bezel RV Switch Faceplate # 37213615 at each location. This way you will be able to control both lights from either location. Each switch is rated for up to 10 amps of power with up to 14volts. Each switch has 3 terminals the center terminals are for connecting to your input power or the 12 volt light. The outer terminals are for connecting to each switch as travel wires. So you...
  view full answer...


• Battery Isolator for Use to Charge 12V Trailer Battery
• You can use a battery isolation solenoid like # PK5231201to allow 12V power from your tow vehicle to reach your trailer connector and charge your trailer battery. This will install on any ignition-controlled circuit, such as that for a power antenna, by using a fuse tap kit # F2526. The center tap on the solenoid accepts this control signal from the key-controller circuit and then allows current to flow between the two other poles on the isolator. On a 7-way wiring setup the 12V power...
  view full answer...